Milling Performance Videos
Carbide End Mills

UTDF
UTCOAT 2 Flute Flat Drill

Original cutting edge geometry and 30° helix angle offer fine chip evacuation and control of hole diameter expansion.
By double-margin and sharp flatland, high-straightness drilling and restraint of burrs when drilling out are achieved.

UTDF Drilling example of blind holes on flat surface and through holes on 45° inclined slope

More videos abailable on YouTube  

CNRS/CFB/CSELB
UTCOAT Radius, Ball and Long Neck Ball End Mills

Improved surface finish of Titanium alloys with 5-Axis milling machine!

Artificial Joint parts on Thigh bone

More videos abailable on YouTube  

2 Flute cBN High-grade Long Neck Ball End Mills for Finishing

Optimized cBN material for milling high-hardness materials.
Fine finishing shape and surface roughness even after milling for 10 hours.

Continuous machining example of convex shape

More videos abailable on YouTube  

2 Flute cBN High-grade Long Neck Ball End Mills for Finishing

Minimum tool damage and stable fine surface even after long finishing process on high-hardness materials.

cBN-LBF Reflector Finishing example

More videos abailable on YouTube  

HARDMAX coated End Mills for Hard Milling - Square / Ball / Long Neck Ball / Long Neck Radius

High efficiency and precision milling on hardened steel SKH51 - 63HRC !

High Precision Fitting - Crossover

More videos abailable on YouTube   Milling Performance Conditions

UDCLB/UDCLBF 2 Flute Long Neck Ball / High Grade Long Neck Ball End Mills for Cemented Carbide and Hard Brittle Materials

Optimized cutting parameters for Low-hardness carbides has greatly reduced the cycle time and milling cost !

UDCLB/UDCLBF Direct milling on Carbide Bevel Gear


More videos abailable on YouTube   Milling Performance Conditions

CXES UTCOAT 4Flute High Efficient Square End Mills with Variable Pitch and Lead

Achieves not only a high efficient miling, but also better surface finish

CXES Engraving


More videos abailable on YouTube

HSB/HSLB/HLRS4000 HARDMAX COAT Ball/Long Neck Ball/Long Neck Radius End Mills for Hard Materials

High Efficient direct milling of SKH51 (63HRC) !
Excellent surface roughness in all parts at standing wall, flat surface, slope and corner R with HARDMAX COAT

HSB/HSLB/HLRS4000 Forging Mold (Spur Gear)


More videos abailable on YouTube   Milling Performance Conditions

UDC Series for Cemented Carbide and Hard Brittle Materials

High Efficient Milling on Cemented Carbide and Hard Brittle (Non-Metallic) Materials !
Tool Line Up: Ball, Long Neck Ball, Long Neck Radius End Mills / Drills / Thread Mills

Introduction of UDC Series


More videos abailable on YouTube

UDCBF Series 2 Flute High-grade Ball End Mills for Cemented Carbide and Hard Brittle Materials

 

UDCBF Series Indexable Insert Mold Milling


More videos abailable on YouTube

HSB/HSLB Series HARDMAX 2 Flute Ball/Long Neck Ball End Mills for Hard Materials

Achieve amazing efficiency and longer tool life on milling hard materials over 40HRC.

HSB/HSLB Series Press Mold Milling


More videos abailable on YouTube

CSEB/CSELB Series UTCOAT 2 Flute Ball/Long Neck Ball End Mills

Broad application range from Copper and raw materials to Hardened Steels (55HRC).

CSEB/CSELB Series Die Cast Mold (Wheel) Milling


More videos abailable on YouTube

UDC-F "Fine" Series 2 Flute High-grade Ball End Mills for Cemented Carbide and Hard Brittle Materials

The chip pocket designed on tool tip and sharp cutting edge with special treatment offer excellent surface finish.

UDCBF Series Indexable Insert Mold Milling


More videos abailable on YouTube

UDC-F "Fine" Series 2 Flute High-grade Long Neck Ball End Mills for Cemented Carbide and Hard Brittle Materials

UDCLBF Series Bevel Gear Milling


More videos abailable on YouTube

UDCT Series Thread Mills for Cemented Carbide

"Direct Thread Milling" on Cemented Carbide.

UDCT Series UDCMX+UDCT 16 holes Milling


More videos abailable on YouTube

UDCMX Series Drills for Cemented Carbide

Drilling Carbide - Stunning!

UDCMX Series ø2.5 100 holes Milling


More videos abailable on YouTube

UDCMX 100 blind hole drilling


More videos abailable on YouTube

UDCB Series Ball End Mills for Cemented Carbide

Coating with a very hard surface, excellent wear resistance and material-adhesion resistance.

Diamond Coated End Mill Milling Performance (276KB) *In Japanese only

 

Diamond coated End mill DCB


More videos abailable on YouTube
Page Top